Fig.1 in pages 11 and 12 are typical plating/skin illustrations as specified in System Chapters 53,54, 55 and 57.

To make the curing process slower, decrease the heat that you apply to the compound.

Remove all loose dirt from the seat with a moist cloth.

These actuators control the movement of the ailerons and elevators, which control the flight path of the airplane.

When the autopilot disengages, an aural warning is heard from the aural warning module and the red A/P light on the autoflight status annunciator (ASA) flashes.

The backside of the title page should be left blank to avoid the need for revision and potential loss of the inserted airplane serial and registration numbers.

Except when inapplicable or inappropriate to the particular airplane model, Handbooks shall contain the recommended normal procedures for the following phases of flight, in the order shown.

The Federal Aviation Administration recognized that compliance with this specification will result in a high degree of standardization of content and format for all aircraft types.

An "emergency", however, almost always involves a failure that requires immediate and rapid response, such as a total powerplant failure, fire or smoke, or rapid cabin decompression.

Utilizing an airplane as intended by the manufacturer, combined with sound inspection and maintenance practices , forms the basis for assuring the airplane remains airworthy and safe to operate.

The instruction to supply hydraulic power is on the bottom of the screen that shows the hydraulic power warning, you must scroll down the screen to see the instruction.