To make the curing process slower, decrease the heat that you apply to the compound.

Fig.1 in pages 11 and 12 are typical plating/skin illustrations as specified in System Chapters 53,54, 55 and 57.

A separate shading pattern to distinguish between supply, pressure, return, etc, shall be used. The same coding for each individual system shall be used throughout the manual.

Any revisions to a Maintenance Manual made necessary due to modifications of an airplane after delivery are the responsibility of the holder of the type design approval of the modification.

This specification was developed by representatives of member companies of the General Aviation Manufacturers Association for use in preparing Manufacturers Maintenance Data, in manual form, that will serve as a guide for the maintenance of airplanes in a continuous airworthy condition.

The pressure transducer is installed downstream of the shut-off valve.

Micro-switches in the actuator de-energize it at the end of travel.

A DC motor, which has a permanent high-speed magnet, supplies power to the actuator.

It operates when the pressure applied in the opposite direction is more than a set value.

Thus, a permanent or temporary malfunction of the electrical and electronic equipment and the system can occur.

Key words that often occur in a text to connect different ideas.