The usual control for the left pack makes sure that it supplies air at a temperature that gives the necessary cooling for the flight compartment.

The airframe manufacturer will incorporate into the Maintenance Manual, where appropriate, the "shared interest" data supplied by component manufacturers.

If limitations are incorporated in Section 9, this Section shall contain a note referring the reader to that section for limitations on the optional systems or equipment.

The normal procedures check list should be in concise, abbreviated form and designed to remind pilots of items to check without providing details concerning the operation of any system.

The Handbook shall contain information concerning the procedures or actions that need to be taken by the operator of the airplane to maintain the Handbook in a current status.

The backside of the title page should be left blank to avoid the need for revision and potential loss of the inserted airplane serial and registration numbers.

Longitudinal trim is accomplished by movement of the horizontal stabilizer.

A position transmitter is located below the PCUs.

The most common mistakes in performing the adverse loading checks are failure to convert the oil from quarts to gallons.

The ratio of width to depth must be 30 or more at each point.

Definitions or explanations of symbols, abbreviations, and terminology used in the Handbook should be provided.