This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure required for type certification.

The RESET test switch is used to erase the fault history. Push the RESET switch while the VERIFY and the green GO lights are on.

Outlets along the side walls and the center of the ceiling divide the air for symmetrical supply.

L1 entry door number 1 floor panel has a 1-inch notch 6 inches from the forward right edge.

If you use too much paint, the finish will be unsatisfactory.

Make sure that there are safety barriers around the engine exhaust area.

If the oil leakage is more than five drops a minute, examine the sealant.

The resistance of the fuel temperature bulb changes with fuel temperature.

Divide the crosswind component by the aircraft speed to get the correction.

If it is necessary to decrease the cable tension more, use the turnbuckle.

Make sure that the servicing cart does not hit the aircraft.