Divide the crosswind component by the aircraft speed to get the correction.
答案解析
解析：
### 题目解析
题目中提到“Divide the crosswind component by the aircraft speed to get the correction.” 这句话的意思是将侧风分量（crosswind component）除以飞机速度（aircraft speed），以得到修正值。这正是选项B所表达的内容。
- **选项A**：将飞机速度除以侧风分量，这样的计算方式是错误的，因为我们需要知道侧风对航向的影响，而不是反过来。
- **选项C**：将侧风部件和飞机分开，这种说法不够明确，且没有提供具体的计算方法。
### 侧风修正的理解
为了更好地理解这个知识点，我们可以用一个生动的例子来说明。
想象一下，你在一条宽阔的河流上划船。你希望直线划到对岸，但河水的流动（类似于侧风）会将你推向一侧。为了到达目标，你需要调整你的划船角度，向上游的方向划，以抵消水流的影响。
在这个例子中：
- **划船的速度**相当于飞机的速度。
- **水流的速度**相当于侧风分量。
如果水流的速度很快，而你划船的速度相对较慢，那么你需要更大幅度地调整你的划船方向（即更大的修正）。反之，如果你的划船速度很快，水流的影响就会相对较小，你只需要稍微调整一下方向。
### 数学公式
在飞行中，修正的计算可以用以下公式表示：
\[ \text{Correction} = \frac{\text{Crosswind Component}}{\text{Aircraft Speed}} \]
这个公式告诉我们，侧风分量越大，或者飞机速度越小，所需的修正就越大。
### 总结
相关知识点：
侧风分量除飞机速度得修正值
相关题目
Standardization will enhance safety through uniform interpretation of inspection requirements contained in Continuing Airworthiness Programs prepared in accord with this Specification.
The adjustment test description shall provide instructions for accomplishment of a test or check to assure the integrity as an operational component of a system, subsystem or unit assembly.
Any changes to the limitations, instrument markings, or placards of the basic Limitations (Section 2) of the Pilot＇s Operating Handbook shall be stated.
If the indications do not clearly show that a fastener is loose, make a red line across the head and the adjacent material.
Keep the elevator from moving by installing a wooden block between the inboard edge of the elevator and the tail cone.
When you do the lifting or lowering of the aircraft, make sure that the persons who operate the lifting/lowering equipment have the correct training and knowledge.
The repair must be examined at specified intervals and replaced if deterioration or damage is found.
This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure required for type certification.
The rules contained in this specification shall serve as guides for format, style and method of presentation for all material included in Maintenance Manuals prepared by manufacturers.
Weights corresponding to the airplane as offered with typical seating and interior, avionics, accessories, standard equipment and fixed ballast, and the typical empty weight and maximum useful load based on this weight.
