If you change this repair procedure, get approval of the design authority.

Close the flow control and shutoff valves for the air conditioning packs.

These tests may require supplemental ground support equipment and should be more specific and detailed than an operational test.

The fuel flow transmitter measures the fuel mass-flow that goes to the manifolds and fuel nozzles.

If you select abort during the test, the test stops and the CDU shows the test abort page.

The turbine clearance control sensor supplies the EEC with temperature data from the high pressure turbine shroud.

The servo fuel heater attaches to the engine oil/fuel heat exchanger.

The combustor mixes air from the compressors and fuel from the fuel nozzles.

Notes call attention to methods which make the job easier, or provide supplementary or explanatory information.

Record the location and the color of the cables of each bundle which goes through the AC current transformer.

A fire can be due to excessive overheat or flammable fluid leaks and can endanger the aircraft safety.