If you select abort during the test, the test stops and the CDU shows the test abort page.

Refer to Table 7001 for information about how the pivot assembly is made.

While you do each step of the valve test, make sure that there is no leakage.

Remove the fuel from the ground before you try to start the engine again.

If you change this repair procedure, get approval of the design authority.

You can do this procedure only if there is no other repair in the repair area.

When you install the antenna, the alignment arrow must point forward.

This material releases dangerous fumes when it touches hot surfaces.

If you accidentally move the lever, set the system to the neutral position again.

If there is no contamination in the fuel sample, continue the procedure.

When the wind speed decreases to less than 30 knots, you can open the cargo door.