396.WE ( ) THAT YOU TORQUE THE BOLTS AGAIN AFTER 50 FLIGHT HOURS.

A. 　arms

B. 　activates

C. 　releases

A. 　GETS

B. 　SENSES

C. 　OBTAINS

A. 　从油箱内排放大约 2 升燃油。

B. 　从油箱内排放至少 2 升燃油。

C. 　从油箱内排放不超过 2 升燃油。

A. 　ADHERE

B. 　FOLLOW

C. 　OBEY

A. 　The basic Maintenance Manual or separate documents may consist such
detailed information on more complex and specialized subjects as
Structural Wiring Diagrams or Overhaul information at the discretion of
the manufacturer and to the degree the manufacturer determines
appropriate.

B. 　Such detailed information on more complex and specialized subjects as
Structural Wiring Diagrams or Overhaul Information may be contained in
both the basic Maintenance Manual and separate documents at the
description of the manufacturer and to the degree the manufacturer
determines appropriate.

C. 　Such detailed information on more complex and specialized subjects,
such as Structural Wiring Diagrams or Overhaul Information, may either
be included in the basic Maintenance Manual or made available as separate
documents at the option of the manufacturer and to the extent the
manufacturer determines appropriate.

A. 　This chapter of the Pilot's Operating Handbook shall contain only those
limitations required by regulation or necessary for safety operation of
the airplane and approved by the regulatory authority.

B. 　This Section of the Pilot's Operating Handbook shall abstain only those
limitations required by regulation or necessary for safe operation of the
airplane and approved by the regulatory authority.

C. 　This Section of the Pilot's Operating Handbook shall contain only those
limitations required by regulation or necessary for safe operation of the
airplane and approved by the regulatory authority.

A. 　INNER

B. 　OUTPUT

C. 　INPUT

A. 　建立单独的导线标识码,以组建追踪电路(如图 5)

B. 　建立单独的导线标识码,以协助追踪电路(如图 5)

C. 　建立单独的导线标识码,以装配追踪电路(如图 5)

A. 　within night operation, make sure the panel lights are dim.

B. 　During night operation, make sure the panel lights are bright.

C. 　During night operation, make sure the panel lights are dim.

A. 　to arrive at the incorrect value, set the switch to position 2.

B. 　to get the correct value, set the switch to position 2.

C. 　to get the incorrect value, set the switch to position 2.