This paragraph should also explain that, in addition to the established inspections, other inspections may be required by Airworthiness Directive.

During approach to the runway, deviation pointers in the course indicators give commands to fly up or down and left or right.

During the subsequent test, you get the cracking pressure when the fuel flow from the CROSS FEED port is more than 5 cc/minute.

There is no airflow to the compartment and there is a risk of suffocation.

Animals generate more heat than humans, consequently there is a greater possibility of moisture buildup in the airplane.

Engine analyzers are used to analyze engine performance or condition by means of instruments or devices such as oscilloscopes, etc.

Differences in design and complexity of the various types and models of airplanes play a major role in a specific malfunction.

Turbine engine tachometers usually measure speed as a percentage of the nominal maximum speed of the turbine(s).

It is implied that the inspection will include observation and evaluation of the surrounding area of parts and equipment.

Outside Air Temperature is obtained either from inflight temperature indications or ground meteorological sources.

This revision of GAMA Specification No. 1 incorporates NTSB suggestions for inclusion of emergency procedures for supercharger/turbocharger failure.