相关题目
Basic control and operation information describe how the airplane components are controlled and how they operate, including any special procedures, and limitations that apply.
It is very difficult to determine the effects of corrosion but, as the reports from the CAP inspections are received, the inspection times will be adjusted for any severe problems.
Three computers collect data and parameters from the systems and put them together on the data link to the display unit.
Standardization will enhance safety through uniform interpretation of inspection requirements contained in Continuing Airworthiness Programs prepared in accord with this Specification.
The adjustment test description shall provide instructions for accomplishment of a test or check to assure the integrity as an operational component of a system, subsystem or unit assembly.
Any changes to the limitations, instrument markings, or placards of the basic Limitations (Section 2) of the Pilot＇s Operating Handbook shall be stated.
If the indications do not clearly show that a fastener is loose, make a red line across the head and the adjacent material.
Keep the elevator from moving by installing a wooden block between the inboard edge of the elevator and the tail cone.
When you do the lifting or lowering of the aircraft, make sure that the persons who operate the lifting/lowering equipment have the correct training and knowledge.
The repair must be examined at specified intervals and replaced if deterioration or damage is found.
