相关题目
In the description of the airplane＇s Stall Warning or Angle of Attack System, the manual shall: (a) If either of these devices is installed, explain whether it is required equipment. (b) Explain the principle of operation. (c) Explain how to check the system and use it. (d) Discuss how to recognize a malfunction and when not to depend on it.
Those units and components which furnish a means of supporting and steering the aircraft on the ground or water, and make it possible to retract and store the landing gear in flight. Includes brakes, wheels, floats, doors, shock struts, tires, linkages, position indicating and warning systems.
Required and recommended airspeeds (and the configuration of the airplane for which the airspeeds apply) deemed likely to enhance safety of operation during an emergency shall be listed at the beginning of this Section or in the Emergency Procedures Check List.
Circle-to-land maneuver is the maneuver made by the pilot to align the aircraft with the landing runway when a linear instrument approach is not possible or required. At tower control airports, air traffic control clearance must be obtained and a visual reference of the airport must be established before such maneuvers can be performed.
The yaw damper works by sensing any yaw motion and then applying corrective inputs to the aircraft＇s rudder to reduce or eliminate any unwanted yawing. It is particularly useful in minimizing the effects of turbulence or other external disturbances that can cause yawing and make the aircraft harder to control. The yaw damper is an important safety feature that helps to improve the overall stability and control of the aircraft, especially during critical phases of flight such as takeoff and landing.
Pressure Altitude refers to altitude measured from standard sea level pressure (29.92 in. hg.) by a pressure or barometric altimeter. It is the indicated pressure altitude corrected for position and instrument error. In this Handbook, altimeter instrument errors are assumed to be zero.
In cases where an item has an exceptionally high degree of complexity requiring specialized techniques, test equipment, or expertise, it is not required that internal diagrams and construction details, or data in interconnect systems, maintenance, troubleshooting, inspection or repair, will be included in the basic airframe Maintenance Manual on major components such as avionics, specialty electronics, engines and propellers.
Deactivation/Reactivation procedures for circuits, systems, units, etc., shall be included. This is important because during maintenance, certain components may need to be deactivated for safety reasons or to prevent damage to the aircraft or equipment. It is also important to have instructions for reactivating these components once maintenance is complete to ensure that they are functioning properly and do not pose a risk to the safety of the aircraft or its occupants.
The recommended fuel conservation procedures shall contain a caution, if applicable, that the power settings recommended by the manufacturer must be used during the break-in period of new and newly overhauled engines. The use of economy power settings during this period may be detrimental to the engine life.
The schematic diagrams should include generators, tanks, and reservoirs that are considered to be the starting points of the flow shown. The diagram shall be arranged so that the flow of the system can be traced with a minimum of effort. Cross-overs shall be avoided as much as possible.
