相关题目
The adjustment/test description shall provide instructions for accomplishment of a test or check to assure the integrity as an operational component of a system, subsystem or unit assembly. Such tests or checks will vary in complexity and stringency according to the conditions under which the unit functions. It is not intended that a complex functional test of a complete system and its attendant closer tolerances be performed if the unit replaced reactivates the system and operates within the confines of a go-no-go specification .
The design authority must give approval to changes that you make to the repair scheme.
Furnished as manufacturer-designated standard equipment, the detection portion of Fire Protection system is used to sense and indicate the presence of overheat, smoke, or fire.
The difference between the two dimensions must not be more than 0.10mm.
The distance between the edge of the panel and the partition must not be more than 0.05 mm.
The Accerlerate-Go Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, continue take-off on the remaining engine (s) to a height of 50 feet.
The emergency exit doors are used to facilitate evacuation that are not normally used for exit.
Items such as cables and conduits are banded together to facilitate removal and installation of the power plant.
The equipment included in the basic maintenance manual may be only that which is normally included and installed in quantity. Data for "Special Order" or other than standard options may be in separate manuals or as seperate data furnished with the individual aircraft.
The equipment included in the basic maintenance manual may be only that which is normally included and installed in quantity. Data for "Special Order" or other than standard options may be in separate manuals or as seperate data furnished with the individual aircraft.
