316.WE RECOMMEND THAT YOU REFER TO THE REPAIR MANUAL.

A. 　Clean the surface to ensure there will be good adhesion.

B. 　Clean the surface to ensure firm adhesion.

C. 　Clean the surface to make sure that the bond is satisfactory.

A. 　该控制组件安装在机身尾部

B. 　该控制组件安装在驾驶舱后部

C. 　该控制组件安装在驾驶舱底部

A. 　按需增加一个螺帽。

B. 　如果必要,增加一个垫圈。

C. 　必须增加一个垫圈。

A. 　This document provides optional information to the befitting airplane
maintenance manual(s)

B. 　This document provides supplemental information to the applicable
airplane maintenance manual(s)

C. 　This document provides extra information to the accessible airplane
maintenance manual(s)

A. 　Apply mass on the surface of the patch to ensure that the parts bond
correctly.

B. 　Bear down on the surface of the patch to make sure that the parts bond
correctly.

C. 　Apply weight on the surface of the patch to make sure that the parts
bond correctly.

A. 　Set the switch to on.

B. 　Move the switch to on.

C. 　Put the switch to on.

A. 　 arms

B. 　 activates

C. 　 releases

A. 　移动所有孔周围的密封胶。

B. 　清除孔周围的所有密封胶。

C. 　检查所有密封胶圈绕着孔。

A. 　In flight,Flight Idle Power required for the engine to operate at slowly
speed is an important condition to ensure good engine operation and
airplane handing characteristics.

B. 　Flight Idle Power is the power required for an engine to operate at
a minimum speed during flight to ensure satisfactory engine operation and
aircraft handing characteristics.

C. 　In flight,good engine operation and aircraft handing characteristics
are guaranteed to provide the engine with Flight Idle Power needed to
operate at the lowest speed .

A. 　GO THROUGH

B. 　PENETRATE

C. 　PASS THROUGH