A、 If you must add pages after the ahead printing, then the page should
have the number of the preceding page and an alphabetic suffix.
B、 In the event a page must be added pursuant to the original printing,
the page shall carry the number of the preceding page with a letter suffix
added.
C、 If you must add pages after the individual printing, then the page should
contain the serial number of the preceding page,and add a suffix letters.
答案：B
A、 If you must add pages after the ahead printing, then the page should
have the number of the preceding page and an alphabetic suffix.
B、 In the event a page must be added pursuant to the original printing,
the page shall carry the number of the preceding page with a letter suffix
added.
C、 If you must add pages after the individual printing, then the page should
contain the serial number of the preceding page,and add a suffix letters.
答案：B
A. Lift the cylinder above its installed position.
B. Lift the cylinder about its installedposition.
C. Increase the cylinder above installed position.
A. to arrive at the incorrect value, set the switch to position 2.
B. to get the correct value, set the switch to position 2.
C. to get the incorrect value, set the switch to position 2.
A. 封面上包含的信息将由制造商自行决定
B. 封面左侧上包含的信息将由制造商自行选择的
C. 封面左侧上包含的信息将由制造商自行设计的
A. The CAP will come up with main and subordinate airframe components,
and main and subordinate systems to achieve the stated objective of
continued airworthiness.
B. Primary and secondary airframe components, and Primary and secondary
systems are contained in CAP to complete the stated objective of continued
airworthiness.
C. To continue the stated objective of sustain airworthiness, major and
minor airframe components, and major and minor system are covered in CAP.
A. 如果有编号,它们无需遵循本规范中的编号而按流程编号,为了避免因规范
材料不适用飞机构型而产生的“间隙”。
B. 如果有编号,它们无需遵循本规范中的编号而按特定的方法编号,以避免因
规范材料不符合飞机型号而产生的“差距”。
C. 如果有编号,它们应按顺序编号,无需遵循本规范中的编号,以避免因规范
内容不适用飞机型号而产生的“间隙”。
A. 修理这个组件之前要得到制造商的许可。
B. 修理这个组件之前要得到航空公司的许可。
C. 修理这个组件之前要得到局方的许可。
A. This material releases dangerous fumes when it touches hot surfaces.
B. On contact with hot surfaces, this material produces dangerous fumes.
C. This material happens dangerous gases when it comes into contact with
hot surfaces.
A. Maneuvering Speed is the maximum speed what required of full uncommitted
aerodynamic control will not exceed the airplane.
B. Maneuvering Speed is the largest speed that the aerodynamic application
by the full available control will not cause the aircraft overexert.
C. Maneuvering Speed is the maximum speed at which application of full
available aerodynamic control will not overstress the airplane.
A. if the engine appears to be heating, turn it off.
B. if the engine appears to be overheating, turn it off.
C. if you think the engine is too hot, turn the switch to “off”.
A. 维护手册的简介部分应包含供应商出版物的清单,或提及此类清单的位置,
无论这些清单是包含在系统说明中还是在单独的文档中提供的。
B. 维护手册的简介部分应包含供应商出版物的清单,并提及此类清单的位置,
无论这些清单是包含在系统说明中还是在单独的文档中提供的。
C. 维护手册的简介部分既不包含供应商出版物的清单,也未提及此类清单的位
置,无论这些清单是包含在系统说明中还是在单独的文档中提供的。
