A、 Space permitting, legends shall be spelled out within the diagram rather
than abbreviated or keyed by numerals to a list of legends at the bottom
or on an adjacent page.
B、 Where Space permits, legends should be illustrated in forms,rather than
briefed or typed in legend lists at the bottom or on adjust pages.
C、 Space permitting, legends have to be explicited within the chat rather
than syncopated or keyed by numbers to a list of legends at the bottom
or on an adjacent page.
答案：A
A、 Space permitting, legends shall be spelled out within the diagram rather
than abbreviated or keyed by numerals to a list of legends at the bottom
or on an adjacent page.
B、 Where Space permits, legends should be illustrated in forms,rather than
briefed or typed in legend lists at the bottom or on adjust pages.
C、 Space permitting, legends have to be explicited within the chat rather
than syncopated or keyed by numbers to a list of legends at the bottom
or on an adjacent page.
答案：A
A. Database synchronization is still on.
B. Database synchronization is in progress.
C. The database is already synchronizing.
A. 如果轮胎温度升高超过 177 度,插头熔化且轮胎放气。
B. 如果轮胎温度升高超过 177 度,易熔塞和轮胎融化。
C. 如果轮胎温度升高超过 177 度,易熔塞熔化且轮胎放气。
A. THINK
B. SUSPECT
C. CONSIDER
A. 设置电门每秒钟三个循环
B. 设置电门每分钟三个循环
C. 设置电门每三分钟三个循环
A. Deflate the system before you disconnect the components.
B. Bleed the system before you disconnect the components.
C. Bleed the system before you interrupt the components.
A. DIM
B. DARK
C. ILLUMINATE
A. The maximum allowable difference is 5 mm.
B. The maximum allowable error is 5mm.
C. The maximum permitted diffrence is 5mm.
A. The order of topics in the Handbook is intended to increase in-flight
usefulness.
B. The sequence of topics in the Handbook is intended to increase in-flight
useless.
A. Maneuvering Speed is the maximum speed what required of full uncommitted
aerodynamic control will not exceed the airplane.
B. Maneuvering Speed is the largest speed that the aerodynamic application
by the full available control will not cause the aircraft overexert.
C. Maneuvering Speed is the maximum speed at which application of full
available aerodynamic control will not overstress the airplane.
A. 用直尺和游标卡尺测量凹痕深度。
B. 用直尺和塞尺测量凹痕深度。
C. 游标卡尺和塞尺测量凹痕深度。
