相关题目
SIGNIFICANT INSPECTION CONDITION (detectable crack size, wear limits, corrosion condition, ctc.) specifies, for a crack inspection, the minimum size crack expected to be discovered. Specifies, for other inspection conditions, the wear limits, corrosion pit depth. etc.
Chapter 26 is entitled "Fire Protection", and is about those fixed and portable units and components which detect and indicate fire or smoke, and store and distribute fire extinguishing agent to all protected areas of the aircraft, including bottle, valves, tubing, etc., if furnished as manufacturer designated standard equipment.
Compliance with both the maintenance and manufacturing requirements is the only way a certificate holder can ensure that a fabricated part is airworthy.
A certificated repair station may not maintain or alter any article for which it is rated if it requires special technical data, equipment, or facilities that are not available to it.
A mixture of water and methanol increases the power of the engine. If the adjustment of the stops is not correct, the results of the test will not be accurate.
Identify revisions, additions and deletions by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.
“加速-停止距离”是指飞机加速到某一特定速度，并假设刚获得该速度的瞬间一发失效，将飞机停止所需要的距离。
Access doors and panels in a zone are identified by the zone number and a two or three letter suffix.
远距离安装的附件齿轮箱通过传动轴连接到发动机，驱动多种附件。
Two operators found bent pins in the discharge cartridge on some fire extinguishers.
