A、 延迟紧急情况的一个例子就是一个起落架对正常的起落架开关不响应,而动力装置或其它系统不存在其它故障。
B、 延迟紧急情况的一个例子就是起落架不正确响应正常的起落架开关动作,当没有其它故障在动力装置或其它系统中。
C、 紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但动力装置或其他系统不存在其他故障。
D、 C.紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但
E、 C.紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但动力装置或其他系统不存在其他故障。
答案:B
A、 延迟紧急情况的一个例子就是一个起落架对正常的起落架开关不响应,而动力装置或其它系统不存在其它故障。
B、 延迟紧急情况的一个例子就是起落架不正确响应正常的起落架开关动作,当没有其它故障在动力装置或其它系统中。
C、 紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但动力装置或其他系统不存在其他故障。
D、 C.紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但
E、 C.紧急情况可以延迟处理的一个例子是,起落架无法对正常的电门选择做出正确响应,但动力装置或其他系统不存在其他故障。
答案:B
A. Incorrect adjustment of the stops will lead to accurate test results.
B. In precision,test results cannot occur unless the stops are adjusted properly.
C. If the stops are not adjusted Incorrectly,the test results will not be precise.
A. 供应足够容量和尺寸的容器。
B. 供应足够容量和直径的容器。
C. 提供符合规范的容器和量尺。
A. Sample the fluid to contaminate microbiology.
B. Do a fuel sampling for microbiological contamination.
C. Obtain a demo of oil to determine the microbial pollution.
A. Make sure that the movement limits of the flight control surfaces are free.
B. Make sure that the travel ranges of the flight control surfaces are clear.
C. Make sure that the travel limits of the flight control rudders are clean.
A. Preset the control to get maximum thrust.
B. Set the control to get maximum thrust.
C. Reset the control to get the maximum force .
A. 本程序给出了不同的扭矩范围以及相应的规定。
B. 本文件给出了不同的扭矩值和其适用的条件。
C. 本程序给出了适用的差异扭矩值和条件。
A. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果疏散设备、救生筏和救生艇、急救箱、着陆照明灯和信号灯、疏散信号系统等物品是制造商指定的标准设备,则它们属于这类设备。但灭火器、氧气设备或氧气面罩不属于应急设备。
B. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果作为制造商指定的标准设备而提供,则包括疏散设备、救生筏和救生艇、急救箱、着陆灯和信号灯、疏散信号系统等物品。不包括灭火器、氧气设备或口罩。
C. 25 章”应急设备“标题写的是应急程序中要求携带的设备。如果疏散设备、救生筏和救生衣、急救箱、着陆照明弹和信号弹、疏散信号系统等物品是制造商指定的标准设备,则上述设备也属于应急设备。但灭火器、氧气设备或氧气面罩不属于应急设备。
A. Ensure that the porosity is less than the specified error.
B. Ensure that the depth of the hole conforms to the specified value.
C. Make sure that the diameter of the hole is less than the specified value.
A. There are several steps to replace the light assembly.
B. The steps to replace the light assembly are not complicated.
C. The following steps are to change the light component.
A. Drain the used oil into a container.
B. Pump the used oil into a container.
C. Suck the used oil into a container.