A、 Replace the defective booster pump.
B、 Remain the present booster pump.
C、 Recharge the failed booster pump.
答案：A
A、 Replace the defective booster pump.
B、 Remain the present booster pump.
C、 Recharge the failed booster pump.
答案：A
A. 飞行员操作手册的本节应包含重要的补充材料(操作信息),以便安全有效地操作配备了各种选装系统和设备的标准飞机。
B. 为了安全顺畅地操作飞机,当标准飞机未配备选装系统和设备时,飞行员操作手册的本节应包含必要的补充材料(操作信息)。
C. 飞行员操作手册的本节应包含适当的补充材料(操作信息),以便在配备了标准飞机所没有的各种选装系统和设备情况下,安全有效地操作飞机。
D. C.飞行员操作手册的本节应包含适当的补充材料(操作信息),以便在配备了标准飞机所没有的各种选装系统和设备情况下,安全有效地操作飞机。
A. 注:在随后的测试中,当来自交输进口的燃油流量超过 5 毫升/分钟时,你将获得开启压力。
B. 注:在随后的测试中,当来自交输进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
C. 注:在随后的测试中,当来自横穿进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
D. C.注:在随后的测试中,当来自横穿进口的燃油流量超过 5 毫升/分钟时,你将获得刮痕压力。
A. This compartment includes some of the electrical equipment.
B. This cabin has some of the electromotive equipment.
C. This bay contains some of the electronic equipment.
A. The maximum continuous power listed in the Airplane Type Data Sheet is used to show compliance with the applicable airworthiness standards and is the value shown in the Pilot's Operating Handbook.
B. The maximum continuous power listed in the Airplane Type certificate is often used to show compliance with the applicable airworthiness standards and is the value shown in the Pilot's Operating Handbook.
C. The maximum continuous power listed in the Airplane Type Data Sheet is used to show compliance with the applicable airworthiness regulations and is beyond the value shown in the Pilot's Operating Handbook.
A. Remove the test cap between the Precooler Control Valve and the 3908 sensor on the control pressure sense line and ensure that there is air flowing out of the port.
B. From precooler control valve to 3908 sensor,remove the sense line test cap,make certain thatthe air flows from the test hub.
C. The purpose of the test cap removal from the Precooler Control Valve to the 3908 sensor is to guarantee that there is airflow at the test port.
D. C.The purpose of the test cap removal from the Precooler Control Valve to the 3908 sensor is to guarantee that there is airflow at the test port.
A. The Federal Aviation Regulations require "maximum continuous power" to be used during airframe and engine combination certification to show obedience with certain criteria.
B. Federal aviation regulations require "maximum continuing power" to be used during the certifying of the airframe and engine to meet certain criteria.
C. Federal aviation regulations,in combination of airframe and engine certification process,the use of "maximum continuous power",are used to show compliance with certain standards.
A. 校正空速是指经过位置调整以及仪表调整后的指示空速。
B. 校准空速指修正了仪表误差和位置误差之后得到的指示空速。
C. 校准空速是指调节位置误差以及仪表误差后的指示空速。
A. 从软管开始弯曲的地方测量软管的弯曲半径。
B. 在软管弯曲的地方开始测量软管的内径。
C. 从软管弯曲的内侧开始测量软管弯曲的角度。
A. This data sheet defines that the product,published by the type certificate,satisfies the airworthiness necessities complying with the conditions and limitations.
B. The product,for which the type certificate was approved,should reach the airworthiness requirements within conditions and limitations stipulating by this data sheet.
C. This data sheet regulates conditions and limitations of the airworthiness demands that the product,which has the qualified type certificate,should fulfill.
A. These tests need no special equipment or facilities except those installed on the aircraft,and are like the tests performed by flight crews.
B. These tests need some special equipment or facilities that are not installed on the aircraft.And these tests are the same to the tests performed by flight crews.
C. These tests need special equipment or facilities that are installed on the aircraft,and are identical with the tests performed by flight crews.
