A、 记住,STE 的重要作用是让读者能够立即理解他们所读到的每一句话。
B、 记住,STE 的初级目标是让读者能够立即反应他们所读到的每一句话。
C、 记住,STE 的主要目的是让读者能够立即理解他们所读到的每一句话。
答案:C
A、 记住,STE 的重要作用是让读者能够立即理解他们所读到的每一句话。
B、 记住,STE 的初级目标是让读者能够立即反应他们所读到的每一句话。
C、 记住,STE 的主要目的是让读者能够立即理解他们所读到的每一句话。
答案:C
A. If the airplane has not been tested for twirl characteristics and recovery methods,a discussion shall be included on the limited conditions for preventing spins and the possible best recovery techniques,and it shall be stated that no testing has been conducted and that the recovery techniques are based on the manufacturer's best comment.
B. If the airplane has not been tested for spin characteristics and recovery methods,a discussion of prevention of spins and probable best recovery techniques will be included with a notation that no tests were made and the recovery techniques are based on the best judgment of the manufacturer.
C. If the aircraft has not been expanded for spin features and recovery ways,prevention of spin and possible best recovery techniques are discussed and it is determined that no exams have beenperformed and that recovery techniques are based on the manufacturer's best judgment.
D. C.If the aircraft has not been expanded for spin features and recovery ways,prevention of spin and possible best recovery techniques are discussed and it is determined that no exams have beenperformed and that recovery techniques are based on the manufacturer's best judgment.
A. Obey the safety precautions when you do work with high voltages.
B. Obey the safety warnings when you do work with high impedance.
C. Obey the safety cautions when you do work with high capacitance.
A. Check all parts with clear defects in accordance with standard industry practices.
B. Check all parts for visible defects in accordance with standard industry practices.
C. Check all parts for serious defects in accordance with standard industry practices.
A. 查找损伤。
B. 看一下损伤。
C. 检查损伤。
A. 这种调整的精度很重要。
B. 这种调整的范围很重要。
C. 这种测试的精度很重要。
A. 不要打印标题页的后一页。
B. 不要印在扉页的背面。
C. 不要在标题页后面涂改。
A. When showing a low flow or not sufficient cooling condition,the low flow sensor produces an alarm signal of the flight compartment for warning.
B. When a low flow or under cooling condition occurs,the low flow sensor provides an alarm signal to the cabin compartment for alert.
C. When a low flow or not sufficient cooling condition occurs,the low flow sensor supplies an alarm signal to the flight compartment for annunciation.
A. After pressing the LSK next to EXIT,the BITE will take you out of BITE test and the airplane will return to its normal condition.
B. The BITE will continue the BITE test and the airplane will go back to its usual condition when you push the LSK next to EXIT.
C. The BITE will proceed the BITE test and the airplane will go back to its normal configuration after releasing the LSK that is adjacent to EXIT.
A. 对邻近区域做检查。
B. 对表面区域做检查。
C. 对内部区域做检查。
A. 所有官方技术名称都由三个以上名词组成,在第一次出现时都是完整的。然后,在正文的其余部分,使用相关的批准缩写。
B. 所有由三个以上名词组成的官方技术名称都要写全第一个词。然后,在正文的其余部分,使用相关的正规缩写。
C. 所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文章的其余部分使用相应的批准缩写。
D. C.所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文
E. C.所有由三个以上名词组成的官方技术名称在文中第一次出现时都是使用全称,之后在文章的其余部分使用相应的批准缩写。