A、 When described the aircraft and its system,you should always use third people talking.
B、 Generally,in describing the airplane or its system,third person wording should be used.
C、 When you describing the airplane systems,third person mood shall be used.
答案：B
A、 When described the aircraft and its system,you should always use third people talking.
B、 Generally,in describing the airplane or its system,third person wording should be used.
C、 When you describing the airplane systems,third person mood shall be used.
答案：B
A. 拆下接合表面漆层周围的转接板。
B. 去除转接板接合面周围的底漆涂层。
C. 拆卸转接板来去除接合面周围的面漆。
A. 接近和位置的说明会在这里给出不少信息。
B. 除非很困难,否则接近和位置的说明会在此给出。
C. 除非很明显,否则接近和位置的说明会在此给出。
A. Make sure to dim the panel lights during day and night operation.
B. During night operation,make sure that the panel lights are moderately bright.
C. Ensure that the panel lights are set to a dim setting during night operations.
A. The bolt will be at the 2 o’clock position when you look at the pump from the rear.
B. The rivet is installed on the 2 o'clock position of the pump when looking from rear to front.
C. Look at the bolt installed on the pump from rear to front at the 2 o'clock position.
A. Completely retract the rod slowly and ensure not to touch other components.
B. Slowly protect the bar andguarantee not touching other parts.
C. Slowly extend the rod fully and make sure that it does not touch other parts.
A. The operation of new generation aircraft has adopted the operation method of damage tolerance.
B. The damage tolerance design method is applicable to the new type aircraft.
C. The design concept of damage tolerance was successfully applied to the design of new generation aircraft.
A. 故障隔离使用识别、寻找和纠正任何发生在飞机上的故障的方法,并提供所需的信息。
B. 故障隔离提供信息,这些信息用于定位、寻找和纠正任何发生在飞机上的故障。
C. 故障隔离提供信息,这些信息用于识别、定位和纠正任何可能会发生在飞机上的故障。
A. Maximum attitude for flight planning will be affected.
B. Maximum altitude for flight planning will be affected.
C. Maximum attitude for flight planning will be effected.
A. 保留部分未达到满意粘合度的密封。
B. 丢弃所有粘合效果达标的密封件。
C. 丢弃所有黏合不好的密封件。
A. An aircraft must comply with all the Airworthiness Standards and special conditions applicable to it,otherwise,a Type Certificate can not be issued for that aircraft.
B. A Type Certificate will not be issued for the aircraft if that aircraft meets all the requirements of Airworthiness Standards and special conditions which are applicable to it.
C. The aircraft will get a Supplemental Type Certificate only if the aircraft accords with all the applicable Airworthiness Standards and special conditions.
