365.MAKE SURE THAT THE TOILET ASSEMBLY FLUSHES CORRECTLY.

A. 在安装 V 型卡箍前先涂润滑脂。

B. 拆卸前用润滑脂润滑 V 型卡箍。

C. 在安装 V 型卡箍前先打磨光滑。

A. Emergency illumination refers to an individual and dependent subsystem which is used to provide lighting when the main electrical power fails.

B. Emergency lighting can provide illumination for an individual and independent subsystem in case of main electrical power failure.

C. Emergency lighting is the separate and independentsubsystem used to provide illumination in case of primary electrical power failure.

A. 转动凸轮以使显示器松脱。

B. 转动旋钮使显示消失。

C. 转动把手以使显示器不再显示。

A. 金属材料会导致磁反应。

B. 金属物体会引起磁干扰。

C. 金属材料会引起磁效应。

A. The Preface has been omitted in the sample CAP in Section Ill and the necessary information has been included in the Objectives.

B. The Objectives of third CAP sample is omitted and the necessary information is included in the Preface description.

C. The necessary information has been included in the sample description,so the CAP III omitted the Objectives in the Preface.

A. A centrifugal pump supplies hydraulic fluid to the unit.

B. The unit is isolated from hydraulic fluid through a centrifugal pump.

C. A centrifugal pump withdraws hydraulic fluid from the unit.

A. When the movement of input rod is ranged from 5 to 10 mm,measure the piston retraction.

B. When the input lever is between 5 and 10 mm,measure the piston extension.

C. When the interval of input shaft changes between 5 and 10 mm,measure the expansion of the piston.

A. 试验结果表明,需要实施故障识别程序。

B. 如果测试没有给出满意的结果,执行故障隔离程序。

C. 如果测试结果不满足,启动故障探测程序。

A. The operational test of HFS-900D transceivers is an internal functions check of the HF transceiver and it is a BITE test.

B. The BITE test for the HFS-900D transceivers is the operation test that does the inner check of the HF transceiver.

C. The check of the internal functions of the HF transceiver is a BITE test related to HFS-900D transceivers.

A. Reinstall the supply ducts in the wing de-icing system.

B. Install the telescopic ducts in the wing de-icing system.

C. Install the elastic ducts in the wing anti-icing system.