Moving the speed brake lever will provide the clearance needed to remove the center lower display unit.

To get the correct clearance, add special shims, as necessary.

Make sure that you remove all tools and equipment.

A review of test results applicable to the design was made.

Inspection times will be adjusted for any severe problems.

Isolate the section that is causing the trouble.

A list of Page Effectivity should be provided in the front of each Manual.

The Preface contains the following information.

Units of measurements shown in manual must be consistent.

Table of Contents pages must be dated but need not be numbered.

Prepare the airplane for prolonged out-of-service care.