The repair limits are not given because special equipment is necessary.

A. The repair limits are not permitted as special equipment is required.

B. The repair limits are not mentioned as special equipment is required.

C. The repair limits are not set as special equipment is required.

The auxiliary battery and auxiliary battery charger connects in parallel with the main battery during non-normal conditions to help supply power.

A. The auxiliary battery and auxiliary battery charger and the main battery connect together during non-normal conditions to help supply power.

B. In normal conditions,the auxiliary battery and auxiliary battery charger should be disconnected.

C. In non-normal conditions,the auxiliary battery and auxiliary battry charger should be disconnected.

Light L4 comes on in 5 seconds or less .

A. Light L4 illuminates within 5 seconds.

B. Light L4 comes on after 5 seconds.

C. Light L4 comes on 5 seconds before.

Three computers collect data and parameters from the systems and put them together on the data link to the display unit.

A. Data and parameters are gathered by three computers from the systems and put together on the data link to the display unit.

B. Data and parameters are generated by three computers in the system and are displayed on the display unit through the data link.

C. After analyzing the data and parameters from the system, three computers send the final result to the data link for display.

Measure the resistance between the antenna baseplate and the airplane skin.

A. Evaluate the impedance between the antenna baseplate and the airplane skin.

B. Record the measured resistance between the antenna baseplate and the airplane skin.

C. Perform the measurement of the resistance between the antenna baseplate and the airplane skin.

Each handbook shall have a log of revisions or effective pages.

A. Each revision and the effective page should be logged in the logbook.

B. Only the effective revisions pages need to be recorded in the manual.

C. Each manual shall have a record of revisions or effective pages.

The airplanes were delivered with recommended inspection programs to keep them airworthy.

A. The delivery of the aircraft is required to ensure its airworthiness, therefore it is subject to customer inspection procedures.

B. The airplanes are airworthy because they were delivered in accordance with advised inspection procedures.

C. The airplanes are delivered with mandatory inspection procedures to ensure their airworthiness.

Clean the surface with a soap-and-water solution.

A. Clean the surface with a soap and clean a water solution.

B. Use a soap-and-water solution to clean the surface.

C. Use a soap to clean the surface and a water solution.

Do the troubleshooting procedure to find the cause of the malfunction.

A. Troubleshooting can only be performed after the cause of the malfunction has been found out.

B. You should perform troubleshooting according to the procedure and find out the technical failure.

C. According to the procedure, perform the troubleshooting to solve the cause of the malfunction.

This material releases dangerous fumes when it touches hot surfaces.

A. When this material comes into contact with hot surfaces, it emits hazardous fumes.

B. Contact between hot surfaces and this material results in the release of harmful heat.

C. Dangerous fumes are consumed by this material upon contact with hot surfaces.