Procedures for a parked aircraft are included in AMM such as periodic engine running, control or drainage of fluid systems, static grounding, etc.

Identify the disassembled parts with tags, this method will help you during the subsequent assembly procedures.

The localizer course is aligned with the centerline of the runway, and the glideslope path is at a constant angle to the threshold of the runway.

These test and inspection equipment and tools are used to make airworthiness determinations on articles.

The first step should always be Job Set-up and last should be Close-Up or Clear -Up.

The localizer signals are processed by the transceiver and data are transmitted to Air Traffic Control.

WARNING: MAKE SURE THAT THE POTABLE WATER SYSTEM IS NOT PRESSURIZED. A PRESSURIZED SYSTEM CAN CAUSE INJURY TO PERSONS.

Try to confirm the effective date and revision number and date if applicable.

Refer to the appropriate manufacturer＇s Service Manual.

The main cause of valve failure is contamination of hydraulic fluid.

List the tools, equipment and materials required in the job which are not normally included in the mechanic＇s tools.