Move the IDG forward until the input shaft is free of the accessory gearbox and QAD ring, then move the IDG outboard and away from the power plant.

These items will be evaluated by ABC and, if applicable to the airplane configurations concerned, will be added to the document for the benefit of all.

The integrated circuits contains general coverage of those devices having integrated components, in monolithic structure which perform complete circuit function.

For pressurized airplanes and turbo supercharged or turbopropeller powered airplanes, the Maximum Altitude Limits shall be stated.

Turbine engine tachometers usually measure speed as a percentage of the nominal maximum speed of the turbines.

If this maneuver cannot be performed safely, a warning against attempting it shall be provided.

ldentify a revision to an illustration with a black vertical line in the left margin opposite the revised portion or use a "pointing hand".

This procedure points out that the FAA should be contacted prior to any alterations on airplane to ensure that airworthiness of the airplane is not violated.

This Section should contain a recommendation that airplane operator establishes contact with the dealer or certified service station for service and information.

If the format parameter or rule is inappropriate to the type of airplane, equivalents likely to achieve the same objective may be used.

The priority computer compares the output parameters from the unit with its own available data by means of associated logic.