This task gives the maintenance steps which prepare the airplane for flight with both air conditioning packs inoperative.

When the control handle is placed in the DN position, the gear doors open, the gear unlocks and extends and the gear doors close.

For pressurized airplanes and turbo super charged or turbo propeller powered airplanes, the Maximum Altitude Limits shall be stated.

On ground, with hydraulic systems not pressurized, the normal position of the elevators is the droop down position to the servo control stop.

Line Maintenance should be understood as any maintenance that is carried out before flight to ensure that the aircraft is fit for the intended flight.

For ease of reading and cross reference, illustrations, figures and tables should be presented in a vertical layout, if practical.

KNOTS are used throughout to avoid the confusion between knots (KTS) and miles per hour (MPH) in performance charts and tables.

For the Calibration step， the coupler asks the Transceiver for another brief bust of tune power.

The neutral shift sensor is on the right side of the elevator feel and centering unit.

When the autopilot disengages, an aural warning is heard from the aural warning module.

The alphanumeric display shows only voltage and frequency when you select one of these pushbutton.