An "emergency" however, almost always involves a failure that requires immediate and rapid response, such as a total powerplant failure, fire or smoke, or rapid cabin decompression.

Do not place thermocouple wires adjacent to or crossing the power cord to prevent erroneous temperature readings caused by magnetic flux lines.

Only when both manufacturer and operator do their job can remain an entire fleet of airplanes continuously airworthy.

This part provides for a uniform method of arranging and identifying specific subject material.

One characteristic of the component is preventing its axis of rotation tilting as the earth rotates.

Add 0.02 mm to obtain the correct clearance for a standard spherical coupling.

The oil debris monitor is used to sense the size and quantity of ferrous and non-ferrous metal in the scavenge oil system.

Gauges used to indicate lower pressures use a more flexible tube that uncoils and coils more readily.

After the ailerons go back to neutral, make sure that they are flush with the flaps.

The limit is applicable if the aircraft is on the landing gear or on jacks.

The bolt will be at the 2 o＇clock position when you look at the pump from the rear.