移除所有的防止操纵面自由运动的校装销和设备。

They are reserved for use in those cases where the number of breakouts provided by the fourth digit in the 05-20 breakout is not sufficient to cover all of the maintenance checks dictated by subsystem 05-10 above.

In general, it is desired that the following chapter arrangements and breakdown be followed uniformly and to the maximum extent practicable in all manuals.

For turbo-propeller powered airplanes only, the Minimum and Maximum Outside Air Temperature Limits shall be presented as a function of pressure altitude.

The exact content of the Abnormal Procedures Section shall be determined by each Handbook producer, considering the design features of each airplane.

Data shall be presented as Calibrated Airspeed versus Indicated Airspeed assuming zero instrument error.

The flow of the system shall be presented in patterned shading with a minimum of turns in the lines.

Cotter pins are used on engine controls, landing gear, and tailwheel assemblies, or any other point where an actuating movement takes place.

It contains general coverage of plug-in assemblies or subassemblies which perform a complete circuit function and are used on more than one specific system.

That portion of the system is used to control moisture in the air, to control ozone concentrations, to filter radioactive debris from conditioned air, and to treat the air with deodorizers, insecticides, etc., as applicable.

The lower seal comes into view when you pull the lower bearing down.