相关题目
This task puts the airplane back to its usual condition after operation with the air control valve on the variable frequency starter generator (VFSG) air/oil heat exchanger inoperative.
This chapter shall provide that information considered necessary by the manufacturer to properly level the aircraft for any of the various maintenance, overhaul or major repairs which might become necessary during the life of the aircraft .
This will allow the user to identify an affected airplane by examining one list rather than having to check each individual Continuing Airworthiness Program for applicability.
A hole of several inches in diameter may be cut in a piece of metal at a point where the metal is not needed for strength, and the edges of the hole are flanged to give it rigidity.
Located in the flange connecting the generator and drive assemblies, ports make oil flow between the constant speed drive and the generator possible.
Once a certificate or approval is issued for a purpose that requires ongoing compliance, such as a Production Certificate, noncompliance with, or violation of the terms of, the approval would result in civil penalty or administrative enforcement action.
Aircraft maintenance manual or section, which includes at least the following information: introduction information that includes an explanation of the airplane＇s features and data to the extent necessary for maintenance or preventive maintenance.
The technique or procedure necessary to duplicate the performance presented shall be included for those items of performance where the attainment of the predicted airplane performance requires a special sequence of actions.
If fuel or lubricating oil spills, clean the area immediately. A wet surface is dangerous and can cause you to fall.
This Section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection procedure required for type certification.
