The listed technical names are only examples. This is not the complete list of all possible technical names.

维修资料需要持续更新。出现新情况时，运营人应立即与制造商进行坦诚沟通，而制造商应向运营人提供有力协助。只有双方均做好各自工作，整个机队才能保持适航状态。

Functional test should contain all necessary information to perform proficiency tests to maintain system or unit reliability at an acceptable level, without reference to additional documents.

Accelerate Stop Distance is the distance required to accelerate an airplane to a specified speed and, assuming failure of an engine at the instant that speed is attained, to bring the airplane to a stop.

The antiskid system controls the metered brake pressure from the hydraulic brake system or the autobrake pressure from the autobrake system to prevent wheel skid. This gives maximum brake force to stop the airplane with any runway condition.

If the lever lock solenoid fails in the locked position, you can move the landing gear control lever to the up position with the lever lock override trigger. The trigger retracts the forward part of the control lever so it clears the lever lock mechanism.

The flow of systems shall be presented in patterned shading and by having a minimum of turns in the lines. The schematic diagrams should include generators, tanks, and reservoirs that are considered to be the starting points of the flow shown.

Each Chapter or Section is to start with a general description of the system and its operation and should be labeled Description and Operation. If there are interrelationships with other systems, they should be explained.

Each manual shall contain an Introduction which shall include a brief statement explaining the organization, content and method of using the manual in addition to lists, or references to locations of lists, of vendor technical publications.

Unless all of the solid contaminants are removed from the air before it enters the instruments, they will accumulate, usually in the rotor bearings, and slow the rotor.

The specification provides flexibility in Handbook preparation based on the complexity of the airplane while maintaining a high degree of standardization of arrangement, definitions, and performance information.