Where the paint is sufficiently soft, remove it with a plastic spatula.

Sometimes you must break long sentences into shorter ones, delete information which is not necessary, or ask an engineer for further explanation.

Format and layout is to be determined by the CAP producer, recognizing that it is desirable that the format and layout should be similar to the producer＇s existing documents

Use white paper with good strength characteristics and of sufficient weight and substance to eliminate excessive show-through when printed on both sides.

This specification provides for the preparation and issuance of less complex manuals for less complex airplanes than those operated by the large scheduled airlines while achieving industry wide standardization of nomenclature and format.

Detailed information on more complex and specialized subjects may either be included in the basic Maintenance Manual or made available as separate documents at the option of the manufacturer and to the extent the manufacturer determines appropriate.

When it is necessary to order any wire bundles from Boeing, operators should provide the base wire bundle number (61-30396 in this case) and tail number of the airplane where the bundle is to be installed on.

If you use alternative tools or equipment, it is the operator＇s responsibility to make sure that they give the same results and are as safe to the parts and personnel as the tools or equipment specified in the procedure.

These inspection features are mandatory and cannot be changed or deleted without the approval of the FAA Oversight Office that is responsible for the airplane model Type Certificate.

It shall be made clear that when the subject system or equipment is installed, the associated Supplement must be in the Pilot＇s Operating Handbook at all times.

This document shall specify, for a crack inspection, the minimum size crack expected to be discovered or, if no minimum is defined, a statement to this effect.