Identify the cables with a code.
答案解析
解析：
相关知识点：
用代码标识电缆
相关题目
In two digits of Section Number in the Continuing Airworthiness Program lnspection number, the first digit is determined by GAMA Specification No. 2 Numbering System, and the second digit is determined sequentially by the manufacturer.
The manufacturer may establish procedures to provide feedback (from operators and maintenance facilities who comply with a CAP) on unairworthy conditions (whether covered or not covered by the CAP) that were discovered when complying.
In addition to applicable airplane models or components, the Applicability Statement may also contain special information, such as exclusions or additions, in note form.
The Preface contains the following information: (l) The reasons for establishing the CAP program and the underlying problems to be prevented by compliance with the specific CAP. (2) The relationship of the CAP to normal inspection programs for the airplane.
The primary document containing the procedures for the continuing airworthiness of an airplane is the airplane’s maintenance manual (Instructions for Continuing Airworthiness). A document prepared in accord with this Specification supplements, and is designed for use with, that maintenance manual.
A CAP supplements the airplane’s maintenance manual (or Instructions for Continuing Airworthiness) which is the primary document containing the procedures for the continuing airworthiness of the airplane.
Some airplanes, particularly relatively simple airplanes, may not need CAPs because adequate information to maintain their continuing airworthiness throughout their useful lives is contained in the airplane’s maintenance manual. In such cases, a CAP need not be published.
CAPs may be prepared for all types of general aviation airplanes and components certificated under the applicable Federal Aviation Regulations.
The primary document containing the procedures for the continued airworthiness of an airplane is the airplane’s maintenance manual. A document prepared in accord with this Specification supplements, and is designed for use with, that manual.
Recommendations for ATC holding operation in icing conditions for up to 45 minutes shall provided.
