相关题目
The resulting data were used to determine if the component should be considered for incorporation into the CAP.
Existing analyses were reviewed to identify components and areas that may have exhibited lower margins of safety.
Solenoid valves shall be shown with a notation indicating whether the valve is spring-loaded to the open or closed position.
Arrows shall be used to indicate flow direction when needed to understand the schematic diagram.
Install safety wire to the knurled retaining ring and the clogging indicator body.
The thickness of the strap should be between 1 and 1.2 times the thickness of the initial stringer pad.
Dry wet insulation blankets prior to re-installing, or replace with new, as applicable.
Make the countersink washers for the initial fastener locations in the initial skin.
The result can be a hole that is larger than the maximum dimension that is permitted.
Safety instructions tell the readers that procedures or steps in procedures can be dangerous or cause damage.
