The air goes through riser ducts and up side walls to an overhead distribution duct.
答案解析
解析：
当然，我很乐意帮助你理解这道题。
首先，让我们来分析题干：“The air goes through riser ducts and up side walls to an overhead distribution duct.” 这句话描述的是空气在通风系统中的流动路径。现在，让我们看看每个选项：
A. 空气流经立管并向上至侧壁和头顶分配导管。
B. 空气通过立管和上方管壁流入头顶交输总管。
C. 空气通过立管和上方侧壁流入头顶分配导管。
选项A中，“侧壁和头顶分配导管”这个表述有些混淆，因为它似乎暗示空气同时流向侧壁和分配导管，但实际上，空气应该是沿着一个特定的路径流动。
选项B中，“交输总管”这个术语并不常见于描述通风系统，通常我们使用“分配导管”来描述将空气分布到各个区域的管道。
选项C则描述了空气通过立管（riser ducts）向上流动，然后通过上方侧壁（side walls）进入头顶的分配导管（overhead distribution duct）。这里的描述是最准确的，因为它符合通风系统中空气流动的一般路径。
为了更好地理解这个知识点，我们可以想象一下一个简单的通风系统。想象一个建筑物，它的空气从底部开始，通过立管（riser ducts）向上流动。立管就像建筑物的脊柱，空气在其中上升。当空气到达建筑的侧面时，它通过侧壁进入分配导管。这些分配导管位于天花板上，负责将空气均匀分布到整个空间。
因此，选项C是正确的，因为它准确地描述了空气在通风系统中的流动路径。
现在，让我们用一个生动的例子来加深理解。想象一下，你正在一个大型剧院里，舞台上有一个巨大的通风管道系统。当舞台上的演员需要呼吸新鲜空气时，空气就会从舞台底部通过立管上升，然后通过侧面的通风口进入分配导管，最终被均匀地分布到整个剧院的观众席上。这样，每个观众都能享受到清新的空气。
相关知识点：
空气经立管入头顶导管
相关题目
Distribution of air conditioning system is used to induct and distribute air. Includes equipment rack cooling systems and items such as blowers, scoops, ducting, inlets, check valves, etc. Does not include valves which are part of pressurization and temperature control.
There are three types of placards and markings. A. Safety Data: These placards and markings are used for the flight crew, and passenger cabins, and for equipment safety. They include WARNINGS and CAUTIONS. B. Maintenance Data: These are servicing and maintenance instructions. C. By Local Regulation: The aircraft must have these placards and markings. When these types of placards are shown in Chapter 11, they are identified by (1).
Functional Test: That procedure required to ascertain that a system or unit is functioning in all aspects in accordance with minimum acceptable system or unit design specifications . These tests may require supplemental ground support equipment and should be more specific and detailed than an operational test. It should contain all necessary information to perform proficiency test to maintain system or unit reliability at an acceptable level ,without reference to additional documents.
Dissimilar metal corrosion refers to the corrosion that occurs when two or more different metals are in contact with each other in the presence of an electrolyte . In this situation, an electrochemical reaction is set up between the metals, which causes one of the metals to corrode more quickly than it would have done on its own.
Many altimeters contain linkages that rotate a numerical counter in addition to moving pointers around the dial. A quick reference window allows the pilot to simply read the numerical altitude in feet. The motion of the rotating digits or drum-type counter during rapid climb or descent makes it difficult or impossible to read the numbers. Reference can then be directed to the classic clock-style indication.
A turn coordinator senses and indicates the rate of both roll and yaw. The rotor of the gyro in a turn coordinator is canted upwards 30°. As such, it responds not only to movement about the vertical axis, but also to roll movements about the longitudinal axis.
The drain and vent system consists of lines collecting and carrying waste fluids and vapor overboard from the engine and nacelle accessories. Drains are provided to carry fluids from any point where lines and accessories may leak and where fluids may accumulate in a cavity. Fluid from forward and aft sumps, oil-fuel heat exchanger, VBV, and VSV are discharged overboard through drains. In addition, some drain lines serve as vents to carry air and vapor from the engine and accessory cavities.
Wires and wire bundles must be supported by clamps or plastic cable straps. Clamps and other primary support devices must be constructed of materials that are compatible with their installation and environment, in terms of temperature, exposure to ultraviolet (UV) light, and wire bundle mechanical loads. They should be spaced at intervals not exceeding 24 inches. Clamps on wire bundles should be selected so that they have a snug fit without pinching wires.
Systems consisting of several components, such as ice protection systems, may have Supplements for each component, such as propeller boots, wing and empennage boots, or heated airspeed static source, if the equipment is FAA Approved by component and marketed individually.
A Safety and Operational Tips section may be incorporated in the Pilot＇s Operating Handbook. It may contain: (a) Safety information of a general nature, such as: 1. kinds of information and rules to be found in FAA publications; 2. how to conduct various airplane inspections; 3.medical problems and information (vertigo, hypoxia, fatigue, affects of scuba diving, etc.); and 4.any other information that would enhance the safe use of the airplane. 5.Child restraint systems: A small child should use an approved child restraint seat. The child should not be held or share a seat belt with another person.
