Use the left opening for easy access.

Airplane certification conditions include one engine becoming inoperative and windmilling (or, in airplanes with autofeathering devices, feathered), not more than a 5° bank toward the operative engine, takeoff power on the operative engine, landing gear up, flaps in the takeoff position, and the most critical C.G.

Wing and power loading is based on the Maximum Takeoff Weight and the Takeoff Horsepower Rating and the Wing Area.

Pilots Operating Handbooks are appropriate on airplanes having a certification basis of FAR 23 except Commuter Category.

This handbook includes the material required to be furnished to the pilot by the federal aviation regulations and additional information provided by the manufacturer and constitutes the FAA approved airplane flight manual.

Those units and components which furnish a means of supporting and steering the aircraft on the ground or water, and make it possible to retract and store the landing gear in flight. Includes brakes, wheels, floats, doors, shock struts, tires, linkages, position indicating and warning systems.

Flight Controls System refers to those units and components which furnish a means of manually controlling the flight attitude characteristics of the aircraft, including items such as hydraulic boost system, rudder pedals, control column linkages, control cables, tab controls, mounting brackets, etc.

Tank and reservoir capacities in U.S., imperial and metric measure, shall be included. ANA or other standard specification number and grade (if applicable) of fuel, oil, fluid, and other material used shall be given. Specifications and grades shall be shown grouped on one page to facilitate revisions. For fuel, given expansion volume, total fuel capacity, sump capacity, net fuel capacity (as applicable). For oil, given allowance for expansion.

Chapter 26 is entitled "Fire Protection", and is about those fixed and portable units and components which detect and indicate fire or smoke, and store and distribute fire extinguishing agent to all protected areas of the aircraft, including bottle, valves, tubing, etc., if furnished as manufacturer designated standard equipment.

Under the title "Emergency" in Chapter 25 are those items of equipment carried for use in emergency procedures. Includes items such as evacuation equipment, life rafts and jackets, first aid kit, landing and signal flares, evacuation signaling systems, etc., if furnished as manufacturer-designated standard equipment. Does not include fire extinguishers, oxygen equipment or masks.

The adjustment/test description shall provide instructions for accomplishment of a test or check to assure the integrity as an operational component of a system, subsystem or unit assembly. Such tests or checks will vary in complexity and stringency according to the conditions under which the unit functions. It is not intended that a complex functional test of a complete system and its attendant closer tolerances be performed if the unit replaced reactiviates the system and operates within the confines of a go-no-go specification .