Isolate the defective portion of the circuit.

Fuel system also includes integral and tip fuel tank leak detection and sealing. Does not include the structure of integral or tip fuel tanks and the fuel cell backing boards, and does not include fuel flow rate sensing, transmitting and/or indicating.

That portion of the systems includes items such as control handles, cables, actuators, warning systems, linkages, control surfaces, position indicators, etc.

That portion of the systems which controls the position and movement of the rudder and rudder tabs. Includes items such as the rudder pedals, tab control wheel, cables, boosters, linkages, control surfaces, position indicators, etc., as applicable.

The schematic diagram should tend to deal with an overall system rather than with subsystems, e.g., the air conditioning system rather than a compressor within the air conditioning system.

If an obscure abbreviation must be used because of space limitations, it shall be asterisked and spelled out in an unused portion of the image area.

An "emergency", however, almost always involves a failure that requires immediate and rapid response, such as a total powerplant failure, fire or smoke, or rapid cabin decompression.

An example of a deferred emergency is a landing gear that does not respond properly to normal gear switch actions when there are no other malfunctions in the powerplant or other systems.

Required and recommended airspeeds (and the configuration of the airplane for which the airspeeds apply) deemed likely to enhance safety of operation during an emergency shall be listed at the beginning of this Section or in the Emergency Procedures Check List.

Procedures for handling malfunctions or other abnormalities that are not of emergency nature, or involve a potential emergency that may be deferred, may be included in this Section or in optional Section 3A, Abnormal Procedures.

Limits on any Airplane systems or equipment shall be provided. For example, limits may be necessary in connection with electrothermal elements used in ice protection systems, or in battery temperatures.