Cure the sealant at a constant temperature.
答案解析
解析：
**解析：**
1. **题干理解：** “Cure” 在这里是指“固化”或“干燥”，而“sealant” 指的是“密封胶”。“At a constant temperature” 则是指“在一个恒定的温度下”。
2. **选项分析：**
- **A. 在室温固化密封胶：** 这个选项提到的是“室温”，而题干中的“constant temperature” 是指一个恒定的温度，可能是某个特定的温度，不一定是室温。
- **B. 恒温固化密封胶：** 这个选项中的“恒温”准确地对应了题干中的“constant temperature”，即在一个稳定的、特定的温度下固化。这是一个更精确的翻译。
- **C. 常温下确保密封胶固化：** 这个选项虽然也提到“常温”，但“确保”这个词并不完全符合“cure”的意思。同时，题干中并未提到必须是在常温下固化。
**生动例子帮助理解：**
假设你在家里修理一个水槽，使用密封胶来防止漏水。如果你不按照说明书上的要求在恒定的温度下固化密封胶，可能会导致密封效果不佳。比如，你把密封胶放在一个温度不稳定的环境中，温度忽高忽低，这样密封胶可能固化得不均匀，最终可能导致漏水问题。为了确保密封胶的效果，你需要在一个稳定、恒定的温度下进行固化，这样密封胶才能均匀地干燥和固化，从而发挥最佳性能。
在这种情况下，选择B选项“恒温固化密封胶”是最合适的，因为它准确表达了在一个恒定温度下固化密封胶的要求。这种方式能确保密封胶的效果和性能达到预期。
相关知识点：
恒温固化密封胶
相关题目
The minimum jack closed height must be less than the distance between the fitting and the ground when the aircraft is on its wheels.
The air inlet section through which the air enters the compressor section includes items such as guide vanes, shrouds and cases.
Engine system includes the components and units used to control and direct the flow of lubrication through the engine from the inlet fitting to the outlet fitting.
The control section controls the pitch of the propeller blades, but does not include any parts which rotate with the propeller assembly.
Engine mounts refer to the framework, either of build-up construction or forgings, which support the engine and attach it to the nacelle or pylon.
This section in the maintenance manual shall cover subjects such as engine changes, run-up, externally-mounted spare power plants, etc., while in the overhaul manual, it shall cover subjects such as power plant build-up, teardown, etc.
Propeller system includes the complete mechanical or electrical propeller, pumps, motors, governor, alternators, and those units and components external to or integral with the engine used to control the propeller blade angel.
Collector/ Nozzle includes items such as collector rings, exhaust and thrust augmentor ducts, variable nozzles, actuators, plumbing, linkages, position indicators, warning systems, etc.
Those units and components are used to generate, control, distribute electrical current to ignite the fuel air mixture in the cylinders of reciprocating engines or in the combustion chambers or thrust augmentors of turbine engines.
That portion of the system from the main quick disconnect to the engine, which distributes fuel to the engine burner section and the thrust augmentor. Includes items such as plumbing, pumps, temperature regulators, valves, filters, manifold, nozzles, etc. Does not include the main or thrust augmentor fuel control.
