This Section shall contain a legible statement in a prominent location to the effect that the Airworthiness Limitations Section is FAA approved.
答案解析
解析：
当然，我会尽力帮助你理解这道题目。
首先，让我们分析一下题干。这句话是在描述一个特定的要求，即在某个部分的显著位置需要包含一个声明。这个声明的内容是关于适航限制部分的，具体来说，是关于这个部分是否得到了FAA（美国联邦航空管理局）的批准。
现在，让我们看看每个选项：
A. 这个选项直接翻译了题干的要求，明确指出在显著位置应有一个声明，内容是适航限制部分由FAA批准。这个选项非常准确地反映了题干的原意。
B. 这个选项提到的是“当本节很显著标示出适航限制部分，这说明FAA批准了其影响。”这里有一个关键的问题：题干中并没有提到“影响”，而是提到了“适航限制部分”。因此，这个选项并没有完全准确地反映题干的要求。
C. 这个选项说的是“本节应在显著位置包括一份清晰的声明，说明适航限制部分的影响是FAA批准的。”同样，这里的问题在于“影响”这个词，题干中并没有提到适航限制部分的影响，而是提到了适航限制部分本身。
通过比较这三个选项，我们可以看出，选项A是最符合题干要求的。它不仅提到了声明的内容，而且没有引入题干中没有的信息。
为了帮助你更好地理解这个知识点，让我们用一个生动的例子来说明。想象一下你正在购买一台飞机，你当然
相关知识点：
适航限制FAA批准要记清
相关题目
This information should be included in vendor publications where applicable and included in the aircraft maintenance manual where vendor data has been integrated as part of the aircraft manual.
This information shall be presented along with information to aid recognition of icing conditions which may exceed the certified capabilities of the aircraft and its ice protection system.
If contamination causes a blockage of more than 50 percent of the holes, then clean the holes on the rear of the display units.
Warnings and cautions shall precede the text to which each applies, but notes may precede or follow applicable text depending on the material to be highlighted.
Format and layout is to be determined by the CAP producer, recognizing that it is desirable that the format and layout be similar to the producer＇s existing documents.
The backside of the title page should be left blank to avoid the need for revision and potential loss of the inserted airplane serial and registration numbers.
These ALIs are mandatory and cannot be changed or deleted without the approval of the FAA office that is responsible for the airplane model Type Certificate, or applicable regulatory agency.
Revisions, additions and deletions shall be identified by a vertical black line along the outside of the page opposite only that portion of the printed matter that was changed.
This method is recommended as minimizing errors of distribution, and also informs owners of the availability of systems and equipment.
The airplane general arrangement shall be illustrated with a scale line drawing consisting of plan, side and front views presented in a vertical sequence upon a single page.
