A、 Use a filter to remove unwanted material from the oil.
B、 Use a valve to remove unwanted material from the gas.
C、 Use a filter to remove unwanted material from the fluid.
答案:A
A、 Use a filter to remove unwanted material from the oil.
B、 Use a valve to remove unwanted material from the gas.
C、 Use a filter to remove unwanted material from the fluid.
答案:A
A. 发动机的涡轮包括涡轮喷嘴,涡轮转子,机匣等。
B. 发动机中包含涡轮的部分。包括涡轮喷嘴,涡轮转子,机匣等。
C. 发动机中包含涡轮的部分。包括发动机喷嘴,涡轮转子,机匣等。
A. 系统中用于记录机组成员通讯的部分。
B. 系统中用于记录机组成员通话的部分。
C. 系统中用于记录机组成员协调的部分。
A. Manually turn the canopy in both direction to make pin remove easier
B. To make the canopy turn easier, manually move the canopy in one direction and then in the other
C. It is easier to remove the pin, if you manually turn the canopy alternately in the two directions
A. Do not use compressed air to clean the holes behind the display unit, because it can blow contaminants into display unit which may be damaged.
B. Do not use compressed air to clean the holes on the rear of the display unit, Compressed air will push contamination into the display unit, this can cause damage to the equipment.
C. Because pressurized air can blow contamination away from the display unit, you should not use it to clean the holes behind the display unit in order to avoid damaging the equipment.
A. 一台发动机能够给所有系统提供动力
B. 一台发电机能够给所有系统供电
C. 一台动力装置能给所有系统提供动力
A. 两次检查后最少等待两分钟。
B. 两次检查之间的最短时间是两分钟。
C. 两次检查之间最多等待两分钟。
A. 推荐的燃油节约信息应整合到本节中,以便向飞行员展示如何在飞行过程中尽量减少燃油的使用。
B. 推荐将燃油节约信息整合到本节中,为了向飞行员展示在飞行中尽量减少燃油的使用。
C. 此节整合了推荐的燃油使用信息,以便向飞行员展示如何在飞行过程中做到尽量少的使用燃油。
A. Be sure that the position of the damp has the same position with your record before you remove it
B. Make sure that the position of the damp is the same as the position you recorded during the removal procedure
C. Insure that the clamp matches the position that you recorded during the repair procedure
A. all approval must be approved by the Design Authority.
B. get approval for all modifications from the design authority.
C. get approval for all modifications from the production authority.
A. The procedure of attaching the cable is different from that in detail C on Fig.4
B. See detail C on Fig.4 for another way of attaching the cable
C. You can find a different diagram of the cable in detail C on Fig.4