A、 Hydraulic pressure can cause corrosion.
B、 Oil fluid caused corrosion.
C、 There is corrosion Hydraulic fluid can cause corrosion.
答案:A
A、 Hydraulic pressure can cause corrosion.
B、 Oil fluid caused corrosion.
C、 There is corrosion Hydraulic fluid can cause corrosion.
答案:A
A. According to the authority given to persons specified below, the unit recognized in item 3 was inspected in the manner stipulated by authority and is approved.
B. Based on the authority given to the following stated persons, the unit described in item 3 was inspected in the authority defined manner and gets approved.
C. Thanks to the authority given to persons as below, the unit found in item 3 was inspected in the manner stipulated by authority which is approved.
A. 双环路系统按照机组的要求执行回路切换和决断功能,当驾驶舱出现故障指示时,该功能被称为自动自询;
B. 当驾驶舱出现故障指示时,双环路系统自动执行本应由机组作出的回路切换和决断功能,该功能被称为自动自询;
C. 当驾驶舱出现故障指示时,双环路系统自动执行机组所需的回路开关和判断功能,该功能被称为自动自询;
A. 有24片宽弦钛合金风扇叶片。
B. 有24片宽弦合金钢风扇叶片。
C. 有弦宽为24的钛合金风扇叶片。
A. The pilot should keep up in flight, whatever happening.
B. The pilot should keep on in flight, whatever happen.
C. The pilot should keep calm in flight, whatever happens.
A. 对2号引擎进行排故。
B. 对2号发动机进行大修。
C. 对2号发动机进行校验。
A. Prior to ground operations, maximum cooling of the engine bleed air is provided to avoid the overheat damage to the wing leading edge.
B. To keep the wing leading edge from overheat damage, the engine bleed air has a maximum cooling effect during ground operations.
C. While the aircraft is operating on the ground, the engine bleed air provides a best cooling to the wing leading edge to renovate the damage due to overheat.
A. A System testing is self-contained and can repeat other tests, including all modulations and tolerances, to maximize the maintenance of the system or units
B. The system test is independent, and can replicate other tests. This test includes all adjustments and tolerances, so that the system or units keep the highest efficiency.
C. System testing is independent and other tests can repeat, including all adjustments and tolerances, to reach maximum efficiency of the system or units.
A. OTHER
B. OTHERWISE
C. ORIGINAL
A. 如果你得到了一个不需要的移动,做系统测试。
B. 对于非指令运动,需要使用该系统进行测试。
C. 出现非指令运动时,对系统进行测试。
A. 留在部件上的溶剂可能导致腐蚀。
B. 留在部件上的密封胶能够引起侵蚀。
C. 部件表面的颗粒可能引起磨损。