A、 Both FAA and other authority may accept the Specification
B、 Other authority may accept the Specification, but not FAA
C、 FAA or other authority may accept the Speification
答案:B
A、 Both FAA and other authority may accept the Specification
B、 Other authority may accept the Specification, but not FAA
C、 FAA or other authority may accept the Speification
答案:B
A. 在“共同利益”章节的描述、操作和系统故障排除中,推荐使用机身制造商的刊头;但是,对于组件故障排除和维护施工,只能使用机身制造商的刊头。
B. 在“共同利益”章节的描述、操作和系统故障排除中,只能使用机身制造商的刊头;但是,对于组件故障排除和维护施工,可以使用机身或部件制造商的刊头。
C. 在“共同利益”章节的描述、操作和系统故障排除中,只能使用机身制造商的刊头;但是,对于组件故障排除和维护施工,需要同时使用机身和部件制造商的刊头。
A. Tighten the threads, nuts, clips, or connectors to the correct torque.
B. Tighten the bolts, nuts, clamps, or connectors to the correct torque.
C. Tighten the bolts, spacers, clips, or connectors to the correct torque.
A. 如果逐字包含此类数据,则将使用飞机制造商的标头将数据识别为部件制造商的数据,如第7.1.4节所述。
B. 如果逐字包含此类数据,则将使用该制造商的标头将数据识别为部件制造商的数据,如第7.1.4节所述。
C. 如果包含此类数据,则将使用该制造商的标头将数据识别为部件制造商的数据,如第7.1.4节所述。
A. Utilize an oil-free solution.
B. Use a solution with oil.
C. The oil is not used that contains a solution.
A. KEEP
B. HOLD
C. MAINTAIN
A. GOVERNED
B. REGULATED
C. CONTROLLED
A. 在外表面上涂抹密到胶。
B. 在外壁板施加载荷。
C. 在外壳上喷除防锈剂。
A. A In the case that a revision to an illustration happens, a black vertical line or a black hand need not be used to focus on the changed part.
B. If an illustration is to be revised, you may use a black vertical line or a black hand to draw attention to the modified part.
C. A black vertical line or a black hand ought not to be utilized to revise the illustration and draw attention to the changed part.
A. Before removing and disposing the seal ring, cut and dispose the fuse that secures the oil drain plug to the fuel cooled integral drive generator oil cooler.
B. Before removing and retaining the seal ring, cut and retaining the wire that secures the oil fill plug to the fuel cooled integral drive generator oil cooler.
C. Before removing and discarding the sealing ring, cut and discard the wire which safeties the oil cooler.
A. 若临近电门无法使用,执行作动筒的解除程序,以防止损坏活门。
B. 若微动电门无法使用,执行作动筒的解除程序,以防止损坏活门。
C. 若微动电门无法使用,执行活塞筒的失效程序,以防止损坏活门。