A、 对配件进行颜色编码。
B、 用合适的颜色识别组件。
C、 给组件涂上正确的颜色。
答案:B
A、 对配件进行颜色编码。
B、 用合适的颜色识别组件。
C、 给组件涂上正确的颜色。
答案:B
A. Add oil to correct level
B. Add proper oil
C. Add oil to proper level
A. 如果可能的话,告诉你的读者如果不遵守安全指令会发生什么。
B. 如果必要的话,告诉你的读者如果没有安全指令会发生什么。
C. 如果可能的话告诉你的读者会发生什么,判断是否未遵守安全指令
A. The tops of the bolt heads must not be more than 5 MM above the plate
B. The bottoms of the bolt heads can be more than 5 MM above the plate
C. 5 MM is permitted for the tops of the bolt heads below the plate.
A. You may use alerts and cautions to emphasize some important places.
B. The important parts must be highlighted by using the warnings,cautions and notes.
C. Warning,cautions and notes may be used to highlight or emphasize important points.
A. The report of discrepancy should contain the following: Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Heading of Continuing Airworthiness Program Inspection; Location and Description of the Damage; Detecting ways.
B. Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Title of Continuing Airworthiness Program Inspection; Location and Description of the Damage and How Detected should be included in the CAP report.
C. The discrepancy report should cover the information other than the following: Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Title of Continuing Airworthiness Program Inspection; Location and Description of the Damage; How Detected.
A. If you perform the ground test unit, ensure that pressure regulator is turned to Zero.
B. Before you do the ground test, make sure that you have set the pressure regulator to Zero.
C. Before you operate the ground test unit, make sure that the pressure regulator is set to zero.
A. 该信息适用于整个系统。
B. 完整的系统可以适应该信息。
C. 该信息被用于申请整个的系统。
A. 定位器与跑道中心线对齐,下滑道与跑到出口成一定角度。
B. 航道与跑道中心线对齐,下滑道与跑到入口成恒定角度。
C. 航道与跑道中心线对齐,下滑道与跑到出口成恒定角度。
A. To make the melting process faster, apply heat to the compound.
B. To make the curing process faster, apply heat to the compound.
C. To make the evaporation process faster, apply heat to the compound.
A. 记录对蒙皮表面进行的所有修理
B. 记录对蒙皮封严进行的所有修理。
C. 记录对蒙皮损伤进行的所有处理。