3146. The discrepancy report should include the following: Continuing Airworthiness Program Inspection Number; Airplane Model and Serial Number; Airplane Hours; Title of Continuing Airworthiness Program Inspection; Location and Description of the Damage; How Detected ( )

1154. Exterior Placards and Markings are required for ground servicing instructions, inspections, cautions and warnings ( )

1153. We recommended that you do not do this procedure in the hangar ( )

1152. The distance between the edge of the panel and the partition must not be more than 005 mm( )

1151. 推荐的燃油节约信息应整合到本节中,以便向飞行员展示如何在飞行过程中尽量减少燃油的使用( )

1150. 提供空速限制和这些限制的操作意义( )

1149. 确保伺服控制单元处于打开位置( )

1148. Due to frequent changes in , or varying combinations of , some types of equipment such as avionics and instrumentation, ones or more separate documents for these products may be required( )

1147. The diagram shall be arranged so that the flow of the system dan be traced with a minimum of effort ( )

1146. Print all pages except wiring diagrams and foldouts on both sides( )

1145. The surface contour of a repair in a 3 inches radius from the centerline of a static port does not have an error of more than 0007 inch( )