A、 确保夹钳的位置与您在拆卸过程中记录的位置一致
B、 确保夹钳的位置与您在拆卸过程中的位置齐平
C、 确保夹钳的方向与您在拆卸过程中的方向一致
答案:A
A、 确保夹钳的位置与您在拆卸过程中记录的位置一致
B、 确保夹钳的位置与您在拆卸过程中的位置齐平
C、 确保夹钳的方向与您在拆卸过程中的方向一致
答案:A
A. Accumulate the thickness of the shim as follows: t=x-y.
B. Calculate the thickness of the shim as follows: t=x-y.
C. Calculate the width of the shim as follows: t=x-y.
A. 未经保护,请勿进入发动机测试区域。
B. 未经允许不得进入发动机试车区域
C. 未经批准,请勿进入发动机测试控制中心。
A. The airflow then goes along the above and bottom surfaces of the aileron.
B. The air value then goes through the cover and bottom surfaces of the flank.
C. The airflow then goes along the top and bottom surfaces of the slats.
A. IF YOU USE SOLVENT IN A CLOSED SPACE, MAKE SURE THAT THERE IS GOOD AIRFLOW IN THE WORK AREA.
B. IF YOU USE SOLVENT IN A ENCLOSED SPACE, MAKE SURE THAT THERE IS GOOD AIRFLOW IN THE WORK AREA.
C. IF YOU USE SOLVENT IN A CLOSED SPACE , ENSURE THAT THERE IS GOOD AIRFLOW IN THE WORK AREA.
A. Blind rivet is a special rivet used in a sheet metal structure that can be installed when either side of the metal can get access to.
B. Blind rivet is a special rivet used in a sheet metal structure that can be installed when neither side of the metal can get access to.
C. Blind rivet is used in a sheet metal structure because there is not enough space to both sides of the metal.
A. 检查盒子里有无丢失的东西。
B. 检查盒子里内有无遗漏物品。
C. 为了找到丢失的东西需要检查盒子
A. 应使用能产生黑白图像的打印格式来进行复制。
B. 应使用能产生黑白图像的打印形式来进行印刷。
C. 应使用能产生黑白图像的打印形式来进行复制。
A. Make the airplane fall.
B. Ground the airplane.
C. Touch the airplane.
A. To found the basis for those items, the following conceptions have been made.
B. In order to set up the basis for those items to be included, make the following assumptions.
C. Do the following assumptions to build up the basis for those items to be excluded
A. The distance between the edge of the panels and the partition must be less than 0.05 mm.
B. The distance between the edge of the panel and the partition must be equal to 0.05mm
C. The distance between the edge of the panel and the partition must be 0.05 mm or less.