A、 This proposed method is to reduce the errors of distribution to the lowest possible level. It also let the owner know that the systems and equipment are available.
B、 In order to decrease the distribution errors, this way is mandatory to tell the owner about the status of systems and equipment.
C、 Because the errors of distribution is minimum , this method is used to notify the owner to get the systems and equipment.
答案:A
A、 This proposed method is to reduce the errors of distribution to the lowest possible level. It also let the owner know that the systems and equipment are available.
B、 In order to decrease the distribution errors, this way is mandatory to tell the owner about the status of systems and equipment.
C、 Because the errors of distribution is minimum , this method is used to notify the owner to get the systems and equipment.
答案:A
A. Space permitting,legends shall be spelled out within the diagram rather than abbreviated or keyed by numerals to a list of legends at the bottom or on an adjacent page.
B. Where Space permits, legends should be illustrated in forms,rather than briefed or typed in legend lists at the bottom or on adjust pages.
C. Space permitting, legends have to be explicited within the chat rather than syncopated or keyed by numbers to a list of legends at the bottom or on an adjacent page.
A. 如果手册上有危险压力的警告,不要打开容器。
B. 如果手册上有危险压力的指示,不要打开容器。
C. 如果手册上有危险压力的标志,不要打开容器。
A. The format of the cruise capacity display is determined by the aircraft vendor.
B. The form of the climb performance display is decided by the aircraft manufacturer.
C. The format of the cruise performance presentation is at the discretion of the airplane manufacturer.
A. The RAT retraction time is approximately 45 seconds.
B. The RAT time is about 45 minutes.
C. The RAT check needs approximately 45 days.
A. 确保着陆时切断灯的开关电源连接
B. 确保着陆灯断开电门的电连接是安全的
C. 确保着陆灯安全切断了开关电源连接
A. Before removing and disposing the seal ring, cut and dispose the fuse that secures the oil drain plug to the fuel cooled integral drive generator oil cooler.
B. Before removing and retaining the seal ring, cut and retaining the wire that secures the oil fill plug to the fuel cooled integral drive generator oil cooler.
C. Before removing and discarding the sealing ring, cut and discard the wire which safeties the oil cooler.
A. These tests should require other special equipment or facilities apart from that installed on the aircraft and should be comparable to the tests performed by the flight crews.
B. These tests should require no special equipment or facilities other than installed on the aircraft and should be comparable to the tests performed by the flight crews.
C. These tests should require no special equipment or facilities rather than that installed on the aircraft and should be comparable to the tests performed by the flight crews.
A. If the air intake flap is not serviceable lock the air inlet valve in the fully open position.
B. Once the air intake flap does not work, activate the air inlet valve.
C. Deactivate the air inlet valve unless the air intake flap is useable.
A. To found the basis for those items, the following conceptions have been made.
B. In order to set up the basis for those items to be included, make the following assumptions.
C. Do the following assumptions to build up the basis for those items to be excluded
A. That portion of the system that monitors the flight of aircraft during approach and landing. This includes sensing ,
computing, indicating and warning devices such as computers, indicators, warning lights, etc.
B. That portion of the system that monitors the flight of aircraft during approach and RTO. This includes sensing ,
computing, indicating and caution devices such as computers, indicators, caution lights, etc.
C. That portion of the system that monitors the flight of aircraft during takeoff and go around. This includes sensing ,
computing, indicating and warning devices such as computering, indicating, warning lights, etc.