A、 用真空清洁器和刷子清洁设备的内部及其底座。
B、 用真空清洁器和刷子清洁设备的外表面以及安装架。
C、 真空清洁设备及硬件设施的表面涂层。
答案:B
A、 用真空清洁器和刷子清洁设备的内部及其底座。
B、 用真空清洁器和刷子清洁设备的外表面以及安装架。
C、 真空清洁设备及硬件设施的表面涂层。
答案:B
A. The Manufacture recommends that Buyer's qualified technicians inspect , troubleshoot test and repair or replace systems and components recommended by the Manufacturer that may be repairable o replaceable during normal maintenance procedures. The Manufacturer shall provide sufficient information in the Maintenance Manual and/or Maintenance data.
B. The Maintenance Manual and/or Maintenance Data provided by the manufacturer to the Purchaser shall contain enough information to enable qualified mechanics to inspect , troubleshoot test and repair or replace all systems and units that the Manufacturer regarded to be repairable or replaceable during normal maintenance procedures.
C. The Manufacturer shall provide the Purchaser with adequate information to enable the mechanics to do qualified work, such s to inspect troubleshoot test and repair or replace all systems and components that repairable or replaceable with reference to the Maintenance Manual and/or Maintenance Data ad required.
A. 2
B. 3
C. 4
D. 5
A. Troubleshooting: messages explaining possible failures and corrective measures must be covered in this handbook.
B. You may find the troubleshooting information about the malfunctions and the related measures for them in this manual.
C. Troubleshooting information describing probable malfunctions and the remedial actions of those malfunctions shell be provided in this manual.
A. Advisory circular must always be carried out on aircraft.
B. Advisory circular is the procedure that must be used when performing maintenance on an
C. FAA provides advisory circular which is not always carried out on aircraft.
A. Measure the vertical distance between the two parts.
B. Test the vertical clearance between the two components.
C. Measure the lateral distance between the two parts.
A. 只有经过授权的人员方可以留在该区域
B. 只有经过改装的人员方可以留在该区域
C. 只有经过检验的人员方可以留在该区域
A. A body whose position changes with time is said to be moving.
B. If a body change its position with time, it is considered to move.
C. If a body is changing its position and time, it is said to be moved.
A. The aileron channel receives its input signal from a transmitter
B. The aileron channel receives its input signal from a transceiver
C. The aileron channel receives its input signal from a receiver
A. 电磁阀应如此标明,并应包括表示该阀是弹簧加载到打开位置还是关闭位置的符号。
B. 电磁阀应如此标明,并应包括表示该阀是弹簧加载到打开位置或者关闭位置的符号。
C. 电磁阀应如此标明,但不包括表示该阀是弹簧加载到打开位置还是关闭位置的符号。
A. If you must add pages after the ahead printing, then the page should have the number of the preceding page and an alphabetic suffix.
B. In the event a page must be added pursuant to the original printing, the page shall carry the number of the preceding page with a letter suffix added.
C. If you must add pages after the individual printing, then the page should contain the serial number of the preceding page,and add a suffix letters.