1169. Using the wet wing concept, all fuel is stored in three tanks, main tank 1, main tank 2, and center tank, which are constructed of the primary wing structure( )

点击查看题目

2358. 将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时,烤箱温度为 225 到 275 华氏度

点击查看题目

首页

外语语音

仿真知识练习题库

题目内容

(

单选题

)

手机预览

仿真知识练习题库

1656. Turn the adjuster five clicks counter clockwise( )

A、　逆时针转动调节器五圈

B、　逆时针转动调节器 5 个咔嚓

C、　逆时针转动调节器五个单位

答案：C

相关题目

2966. IF FUEL [ ]ON THE GROUND, IMMEDIATELY GO TO A SAFE AREA ( )

A. 　GO INTO

B. 　SPILLS

C. 　FLOW

点击查看答案

3265. Keep all the parts that are serviceable and discard those that are broken ( )

A. 　保留勤务部件,更换那些损坏的

B. 　报废损坏的部件后,保留所有可用的。

C. 　保留所有可用的部件,报废那些损坏的。

点击查看答案

2639. When the preset threshold is reached, the smoke detector triggers a warning via the Cabin Intercommunication Data System( )

A. 　当达到预设阈值时,烟雾探测器通过客舱内部通信数据系统触发警告。

B. 　当预设的温度达到时,烟雾探测器会发出警告,通过客舱内部通信数据系统。

C. 　当预设的数值达到时,客舱内部通信数据系统里的烟雾探测器会发出警告。

点击查看答案

492.Connect tow bar to nose landing gear ( )

A. 　Hinge

B. 　Fix

C. 　Hook up

点击查看答案

543.The splitter fairing divides the air into two parts ( )

A. 　整流环将空气分成两部分。

B. 　尖型整流罩将空气分成两部分。

C. 　分流型整流罩将空气分成两部分。

点击查看答案

2034. 一般而言,当受影响的手册的总页数较少时,应进行修订 ( )

A. 　As a general rule, a reissue shall be prepared when a minor number of the total pages of the manual is affected.

B. 　As a general rule, a revision shall be prepared when a minor number of the total pages of the manual is affected.

C. 　As a general rule, a reissue shall be prepared when a minor affect of the total number pages of the manual is minor.

点击查看答案

1451. 指示必须与表格中的值一致。 ( )

A. 　The indications must agree with the value in the table.

B. 　The indications must be consistent with the value in the table.

C. 　The indications should agree with the value in the table.

点击查看答案

2340. Install the larger bolts ( )

A. 　拆卸较大的螺帽。

B. 　安装较大的螺栓。

C. 　组装较大的螺钉。

点击查看答案

1169. Using the wet wing concept, all fuel is stored in three tanks, main tank 1, main tank 2, and center tank, which are constructed of the primary wing structure( )

A. 　Using the wet wing concept, all fuel is stored in three tanks. These three tanks include main tank1, main tank 2 and center tank. Center tanks are made up of the main wing structure.

B. 　Using the wet wing concept,all fuel is stored in three tanks. These three tanks include main tank 1, main tank 2 and center tank. These three tanks are made up of the main wing structure.

C. 　Using the wet wing concept,all fuel is stored in three tanks. These three tanks include main tank1, main tank 2 and center tank. The primary wing structure consists of main tank 2 and center tank.

点击查看答案

2358. 将所有装有不同金属螺套或有较深盲孔的金属零件在烤箱中干燥至少一小时,烤箱温度为 225 到 275 华氏度

A. 　Dry all metal parts that have different metal inserts or deep blind holes in an oven at 225 to 275℉ [107 to 135℃]for a minimum of one hour.

B. 　Put all different metal inserts or deep blind holes metal parts in an oven at 225 to 275℉ [107 to 135℃]for a maximum of one hour.

C. 　All metal parts that have different metal inserts or deep blind holes are dry in an oven of 225 to 275℉ [107 to 135℃]for a minimum of one hour.

类似热门题库