A、 Check all parts with clear defects in accordance with standard industry practices.
B、 Check all parts for visible defects in accordance with standard industry practices.
C、 Check all parts for serious defects in accordance with standard industry practices.
答案:A
A、 Check all parts with clear defects in accordance with standard industry practices.
B、 Check all parts for visible defects in accordance with standard industry practices.
C、 Check all parts for serious defects in accordance with standard industry practices.
答案:A
A. 微处理器卡可以更换。
B. 微处理器卡可以互换。
C. 微知理器卡可以改变。
A. 用 1/2 英寸的扳手拆下盖子。
B. 用 1/2 英寸长的扳手拆下端盖。
C. 用 1/2 英寸的套筒拆下盖子。
A. 为飞机延长停场周期做准备。
B. 为飞机长时间停用做准备。
C. 准备好飞机做保留故障处理。
A. The pump is installed on the direction opposite to valve flow
B. The pump is installed on the direction identifie to valve flow
C. The pump is installed on the direction identifie to valve
A. 此类测试或检查的混合性和严格程度将根据测试的条件而有所不同组件功能。
B. 此类测试或检查的复杂度和严格程度将根据组件运行的条件而有所不同。
C. 此类测试或检查的复杂度和严格程度将根据组件运行的条件而相同。
A. This specification Meets industry standards for scope of material, arrangement, nomenclature and definitions.
B. This specification Meets airworthy standards for scope of material, arrangement, nomenclature and definitions.
C. This specification Meets industry standards for scope of consumable, arrangement, nomenclature and definitions.
A. Thus, the more words there are in a cluster, the more difficult it is to understand.
B. Therefore, the more words are there in a phrase, the more difficult it is to understand.
C. So, the more nouns in a phrase, the harder it is to understand.
A. Procedure sentence must have as many as 20 words.
B. Procedure sentence contains no more than 20 words.
C. Procedure sentence should contain at least 20 words.
A. It's not easy to install more than two washers for each bolt.
B. It is forbidden to install more than two washers for each bolt.
C. Installing one washer for each bolt is forbidden.
A. This information should be able to help identify the airplane that may exceeds and icing conditions of the certificated capabilities of the airplanes provided.
B. This information shall be presented along with information to aid recognition of icing conditions which may exceed the certificated capabilities of the aircraft and its ice protection system.
C. This information should be provided with information that can help recognize icing conditions that are more than the airplane and certificated capabilities of its ice protection systems.