622.Maintain the power lever at the start" position until the specified minimum oil temperature is reached ( )"

315.把泵侧卡环上的 15 个螺帽拧松。( )

314.调节门操纵杆,直到其与固定点对准。 ( )

313.Wiring diagrams may be shown in the basic Maintenance Manual in the

system/chapter/Sections or in a separate Wiring Diagram Manual( )

312.Utilizing an airplane as intended by the manufacturer, combined with sound inspection and maintenance practices , forms the basic for assuring the airplane remains airworthy and safe operate ( )

311.Add the necessary quantity of oil ( )

310.Wheel axle( )

309.John will call you in advance to tell you when and where to meet( )

308.Go-around arms when the airplane is in the air and , one of these conditions is true: Glideslope mode is active The trailing edge flaps are not up ( )

307.Block to block time is the amount of elapsed time between an aircraft leaving the departure ramp for the purpose of flight and its reaching the arrival ramp at the end of the flight( )

306.Aerodynamic forces are the basic forces acting on an aircraft in flight that are caused by the movement of the air over the surfaces Thurst acts forward , drag acts rearward , lift acts vertically upward and weight acts vertically downward( )