The fuel pump is installed adjacent to the bulkhead.

Repeat application of clean solvent as necessary to remove oils.

According to the specification, handbooks shall be readily revisable.

Individual wire identification codes are established to assist in tracing circuitry.

A high standard of professionalism is necessary to use the STE specification correctly.

Movement of the center of gravity is proportional to the loads on the wings.

Prompt extinguishment is required if fuel leaks.

Display a warning notice on the panel prohibiting the operation of the controls.

If the fuel leak originates at the valve, replace the valve seals.

Clean the opaque plastic surfaces.

Stay away from surfaces that move.